General Information

• Motivation and Contents:
  The increasing availability of powerful and cost-effective computer systems has significantly changed measurement and control technology in recent years. Sensor data can be processed, further analyzed, and interpreted using PC-based systems. The behavior of complex control systems can be simulated and optimized on a PC before implementation. These new capabilities help reduce costs and enable much more extensive environmental analyses. Due to the rapid progress in artificial intelligence, intelligent systems with integrated neural networks are increasingly used in measurement and control engineering. The internship aims to offer a practical introduction to computer-based measurement and control engineering through application-oriented and flexible experiments.
   
• Prerequisites:
  Knowledge from the lecture "Measurement and Control Systems" / "Grundlagen der Mess- und Regelungstechnik" or equivalent
   
• Recognition in the diploma program:
  Students of mechanical engineering can count this internship as Maschinenlabor II.
   
• Conduct of Experiments:
  Each three-hour experiment starts with a ca. 30-minute colloquium. It will be checked whether you are familiar with the topic and content of the experiment. You may only proceed with the actual experiment if the colloquium is passed. Thorough preparation is required to pass the colloquium. .

• Brief description of the Experiments:
  • A1   Measurement of Stochastic Signals:
    This experiment is divided into 2 parts. In the first part, the acceleration of gravity is estimated from a series of observations. The gravitational acceleration is derived from the measured height of fall and the duration of the fall of a ball. In addition to the actual determination of the measured value (acceleration of gravity), a discussion of the measurement accuracy is essential, since without accuracy the measurement result has no meaningfulness.
    In part two, the Kalman filter is presented and explained using a clear example.
  • B1   Image recording and analysis:
    The C-series of experiments in this lab deals with measuring and processing signals in image form. In the first experiment, students will learn how to capture images with a camera. Subsequently, converting images into different formats and analyzing image properties will be taught. Statistical methods such as histograms will be used for the analysis, and various lighting parameters will be tested.
  • B2   Image Processing with filters and segmentation:
    The second experiment in the C-series focuses on various image processing techniques, such as filtering. Using different filters, edges of objects will be detected, and then a Hough transformation will be implemented to approximate shapes. Based on the detected edges and shapes, objects in the image can be segmented. For comparison, segmentation based on a color filter will also be implemented.
  • B3   3D Scene Understanding and Depth Estimation with a stereo camera:
    In the last part of the C-series, the topic of 3D scene understanding will be addressed. For this purpose, students will create a camera model for a stereo camera as a basis for depth estimation and analyze the positions of various objects in the space. Based on this depth estimation, a 3D grid will be generated, which reflects the scene in the camera image in 3D space.
  • C1   Object recognition with Deep Learning:
    In many areas of image processing, classical methods have been replaced or extended by learning methods. In this experiment, students will be introduced to neural networks, a technique from deep learning. For this purpose, an autonomous driving car will be extended with traffic sign recognition, so that this car drives a course based on traffic signs. For this traffic sign recognition, a neural network will be trained on a given dataset, and the driving behavior of the vehicle (e.g., collision avoidance) will be optimized.
  • D1   Control of an Industrial Robot:
    In experiment D1, the knowledge from image processing will be applied and extended with control. This is done using an overall system, in this case, an industrial robot arm. This robot arm has a table tennis racket mounted on the gripper, and the goal of this experiment is for the robot to juggle the ball using table tennis ball recognition and control. For this purpose, the system must be analyzed, and a discrete controller must be implemented and parameterized.
  • D2 and D3   Ball-Balancing Table:
    The series of experiments on the ball-balancing table is divided into two parts, each conducted on a separate experiment date. In an experimental setup consisting of a table that can be tilted in two directions by servo motors, control engineering fundamentals will be practically tested. The goal is to balance a ball on the table and follow various predefined paths. This will initially be achieved with a simple PID controller and a filter for the sensor measurements. Suitable filter and control parameters will be determined analytically and experimentally, and their influence on control behavior and control quality will be qualitatively and quantitatively evaluated. Finally, an outlook on control concepts beyond the basic lecture will be given.

RVMRT in Winter Semester 2025/2026

• For details on organization, scheduled and make-up sessions, and the list of offered experiments, please refer to the noticeboard and room plan.
• Please also follow the guidelines and checklists.
• Registration on this page from October 1, 2025 (10:00 am) to October 20, 2025 (11:59 pm)
• Experiment instructions (will be updated in time for the semester start)
• Group division will be published shortly after registration here.
    (Important: The internship must also be registered as an exam in the KIT student portal!)

Dates:

Experiment A1:         Week 19         17/11/25 - 20/11/25
Experiment B1:         Week 20         24/11/25 - 27/11/25
Experiment B2:         Week 21         01/12/25 - 04/12/25
Experiment B3:         Week 23         08/12/25 - 11/12/25
Experiment C1:         Week 27         12/01/26 - 15/01/26
Experiment D1:         Week 28         19/01/26 - 22/01/26
Experiment D2:         Week 29         26/01/26 - 29/01/26
Experiment D3:         Week 30         02/02/26 - 05/02/26

Make-up date:

                                  Week 31         09/02/26 - 12/02/26

-> The internship runs throughout the semester. Each group will perform an experiment in its assigned week based on the group schedule.